Figure 3-10 Profile: Select A Channel; Table 3-10 Profile: Select A Channel - ZyXEL Communications G-360 User Manual

The following table describes the labels in this screen.
LABEL
Channel Select a channel number from the drop-down list box. To associate to an ad-hoc
network, you must use the same channel as the peer computer.
Step 3.
If you select Infrastructure network type in the first screen, select WEP, WPA-PSK, WPA or
802.1x from the drop-down list box to enable data encryption. If you select Ad-Hoc network
type in the first screen, you can only use WEP encryption method. Otherwise, select Disabled
to allow the ZyXEL G-360 to communicate with the access points or other peer wireless
computers without any data encryption and skip to Step 5.
Using the ZyXEL Utility

Figure 3-10 Profile: Select a Channel

Table 3-10 Profile: Select a Channel

ZyXEL G-360 User's Guide
DESCRIPTION
3-17