Table of Contents
Advertisement
P-870HW-I1 User's Guide
Figure 197 Menu 23.2: System Security - RADIUS Server
The following table describes the labels in this menu.
Table 144 Menu 23.2: System Security - RADIUS Server
FIELD
Authentication Server
Active
Server Address
Port #
Shared Secret
Accounting Server
Active
Server Address
Port #
Shared Secret
33.3 IEEE802.1x
Use this menu to configure IEEE 802.1x wireless authentication for the ZyXEL Device. See
Chapter 6 on page 93
310
Menu 23.2 - System Security - RADIUS Server
Authentication Server:
Active= Yes
Server Address= 192.168.1.100
Port #= 1812
Shared Secret= ********
Accounting Server:
Active= No
Server Address= 0.0.0.0
Port #= 1813
Shared Secret= ********
DESCRIPTION
Select this to enable wireless authentication using a RADIUS server.
Enter the IP address of the external authentication server in dotted decimal
notation.
Enter the port number of the external authentication server. You need not
change this value unless your network administrator instructs you to do so.
Enter a password (up to 31 alphanumeric characters) to be shared between the
external authentication server and the ZyXEL Device. The key must be the
same on the external authentication server. The key is not sent over the
network.
These settings are optional.
Select this to enable user accounting through an external authentication server.
Enter the IP address of the external accounting server in dotted decimal
notation.
Enter the port number of the external accounting server. You need not change
this value unless your network administrator instructs you to do so.
Enter a password (up to 31 alphanumeric characters) as the key to be shared
between the external accounting server and the ZyXEL Device. The key must
be the same on the external accounting server. The key is not sent over the
network.
for background information. To open this menu, enter 4 in menu 23.
Chapter 33 System Security
Advertisement
Table of Contents
Troubleshooting
