ZyXEL Communications P-870HW-I Series User Manual page 303

Table 141 Menu 11.1: Remote Node Profile (continued)
FIELD
Nailed-Up Connection Select this if you want the ZyXEL Device to automatically connect to your ISP
Session Options
Edit Filter Sets
Idle Timeout(sec)
Edit Traffic Redirect
Chapter 30 Filter Setup
DESCRIPTION
when it is turned on and to remain connected all the time. This is not
recommended if you pay for your Internet connected based on the amount of
time you are connected.
If you want to specify input and output filter sets for the WAN port, press
[SPACE BAR] to select Yes and press [ENTER]. Menu 11.1.4 appears.
Enter the number of seconds the ZyXEL Device should wait while there is no
Internet traffic before it automatically disconnects from the ISP. Enter a time
interval between 10 and 9999 seconds.
If you want to set up a backup router, if you have one, in case the ZyXEL
Device cannot access the Internet, press [SPACE BAR] to select Yes and
press [ENTER]. Menu 11.1.5 appears.
P-870HW-I1 User's Guide
303