ZyXEL Communications P-870HW-I Series User Manual page 250

P-870HW-I1 User's Guide
Table 111 SMT Menus Overview (continued)
MENUS
21.1 Filter Set
Configuration
21.2 Firewall Setup
22 SNMP Configuration
23 System Security
23.1 Change
Password
23.2 RADIUS Server
23.4 IEEE802.1X
24 System Maintenance
24.1 System Status
24.2 System
Information and
Console Port Speed
24.3 Log and Trace
24.4 Diagnostic
24.5 Backup
Configuration
24.6 Restore
Configuration
24.7 Upload
Firmware
250
SUB MENUS
21.1.x Filter Rules
Summary
21.1.x.y TCP/IP Filter
Rule
24.2.1 Information
24.2.2 Change Console
Port Speed
24.3.2 Syslog Logging
24.3.4 Call-Triggering
Packet
24.7.1 Upload System
Firmware
24.7.2 Upload System
Configuration File
DESCRIPTION
Use this menu to look at the filter sets in the
ZyXEL Device.
Use this menu to look at the rules for each filter
set.
Use this menu to configure the rules for each
filter set.
Use this menu to activate or deactivate the
firewall.
Use this menu to configure your ZyXEL Device's
settings for Simple Network Management
Protocol (SNMP) management.
Use this menu to change the administrator
password for the ZyXEL Device.
Use this menu to configure a RADIUS server to
use for wireless user authentication.
Use this menu to configure IEEE 802.1x
wireless authentication for the ZyXEL Device.
Use this menu to look at packet statistics,
interface status, and basic device information.
Use this menu to look at basic device
information and LAN interface settings.
Use this menu to change the console port
speed.
Use this menu to configure the ZyXEL Device to
send log messages to a syslog server.
Use this menu to look at information about the
packet that triggered a dial-out call.
Use this menu to check the ZyXEL Device's
connections to other devices.
Use this menu to get instructions for backing up
the current configuration of the ZyXEL Device.
Use this menu to get instructions for restoring a
previously-saved configuration of the ZyXEL
Device.
Use this menu to get instructions for loading new
firmware.
Use this menu to get instructions for restoring
the system configuration of the ZyXEL Device.
This sets the configuration to its default values.
Chapter 21 Introducing the SMT