ZyXEL Communications P-870HW-I Series User Manual page 249

Table 111 SMT Menus Overview (continued)
MENUS
3.2 TCP/IP and
DHCP Ethernet Setup
3.5 Wireless LAN
Setup
4 Internet Access Setup
11 Remote Node Setup
11.1 Remote Node
Profile
12 Static Routing Setup
12.1 Edit IP Static
Route
14 Dial-in User Setup
14.1 Edit Dial-in User
15 NAT Setup
15.1 Address
Mapping Sets
15.2 NAT Server
Setup
15.3 Trigger Port
Setup
21 Filter and Firewall
Setup
Chapter 21 Introducing the SMT
SUB MENUS
3.2.1 IP Alias Setup
3.5.1 WLAN MAC
Address Filter
11.1.2 Remote Node
Network Layer Options
11.1.4 Remote Node
Filter
11.1.5 Traffic Redirect
Setup
15.1.1 Address Mapping
Rules
15.1.1.1 Address
Mapping Rule
15.2.1 NAT Server
Configuration
s
P-870HW-I1 User's Guide
DESCRIPTION
Use this menu to set up the LAN IP address and
to configure the ZyXEL Device's DHCP server.
The DHCP server assigns IP addresses and
provides DNS server information to other
computers on the LAN or WLAN.
Use this menu to partition your LAN interface
into subnets.
Use this menu to configure basic wireless
settings and wireless security.
Use this menu to block or allow other devices to
access the ZyXEL Device.
Use this menu to set up your Internet
connection. Use Menu 11 instead if you want to
set up advanced features too.
Use this menu to set up your Internet
connection.
Use this menu to set up the WAN IP address
and advanced features for the WAN port.
Use this menu to specify input and output filter
sets for the WAN port.
Use this menu to set up a backup router, if you
have one, in case the ZyXEL Device cannot
access the Internet.
Use this menu to look at IP static routes.
Use this menu to configure IP static routes.
Use this menu to look at local user profiles on
the ZyXEL Device.
Use this menu to configure local user profiles on
the ZyXEL Device.
Use this menu to select which address mapping
set you want to configure.
Use this menu to look at network address
translation mapping rules.
Use this menu to configure network address
translation mapping rules.
Use this menu to look at servers for which you
have configured port forwarding rules.
Use this menu to configure port forwarding rules
for servers behind the ZyXEL Device.
Use this menu to change your ZyXEL Device's
port triggering settings.
249