Hardware Connections - ZyXEL Communications P-870M-Ix v2 User Manual

1 Hardware Connections

Take the following steps to connect your P-870M-Ix v2.
1 Use the gray telephone wire to connect the P-870M-Ix v2
DSL port to the DSL port to a telephone jack (or a splitter,
if one is already installed.)
2 Use the Ethernet cable to connect the P-870M-Ix v2
ETHERNET port to the computer for Internet access.
3 Use the included power adaptor to connect the P-870M-Ix
v2 POWER socket to an appropriate power source.
4 After you've made these connections, push in the power
button.
P-870M-Ix v2 Series User's Guide
3