Olsberg Aracar Compact Instruction page 31

● Important!
Before gluing together cladding panels 7+8 (Fig.8):
Place cladding panels 7+8 on a level surface in their
installation position and glue them together before
screwing them together using 3 chipboard screws
Ø5x60 (19).
Position the pre-assembled cladding panels 7+8 on
cladding panels 5+6, glue them together with insula-
tion boards 1+2 and screw them together with 3 chip-
board screws each Ø6x140 (17).
7
17
2
2
5
Fig.8
19 8
1
17
1
6
● Screw plaster frame top (13) to cladding panels 7+8 us-
ing 4 chipboard screws Ø4x30 (23).
● Paint, plaster or tile the cladding (see chapter
"Information regarding the surface treatment").
● Insert cover (14) and inlay cover (15).
● Insert the air grille (16).
7
13
23
Fig.9
Bear in mind that on partition walls in accordance with
test specification EN 13240 the temperature of 85°C
can be reached, and with light wallpaper or similar
combustible construction materials this can result in
colour changes.
15
14
8
16
31