Ppp Setup For Windows; Install Tcp/Ip - ZyXEL Communications omni.net LCD series Quick Start Manual

PPP Setup for Windows

5.
This chapter shows you how to set up a PPP connection by using ZyXEL's ISDN Configuration
Manager with the Windows operating system.
To access the Internet, you must first install TCP/IP on your computer and then configure TCP/IP.
After TCP/IP configuration, you may set up PPP by using ZyXEL's ISDN Configuration
Manager and create a PPP connection to access the Internet.

Install TCP/IP

If TCP/IP is already installed in your computer then you may go to the next section entitled
Configure TCP/IP. If not, follow the steps below:
Step 1. Click Start, Settings, Control Panel and then double-click on the Network icon.
Step 2. Click Add.
Step 3. Highlight Protocol and then click on "Add...".
omni.net LCD series Quick Start Guide
Protocol and
then click
5-1
Highlight
"Add...".