Add/Edit A Name Server Record; Figure 97 Device Operation > Device Configuration > Advanced > Dns > Name Server Record > Add/Edit - ZyXEL Communications Centralized Network Management Vantage CNM User Manual

Centralized network management
Table of Contents

Advertisement

Chapter 7 Device Advanced Settings

7.9.1 Add/Edit a Name Server Record

Use this screen to create or edit a name server record.
Figure 97 Device Operation > Device Configuration > Advanced > DNS > Name Server
Record > Add/Edit
The following table describes the labels in this screen.
Table 87 Device Operation > Device Configuration > Advanced > DNS > Name Server
Record > Add/Edit
LABEL
Domain Zone
DNS Server
198
DESCRIPTION
This field is optional.
A domain zone is a fully qualified domain name without the host. For example,
zyxel.com.tw is the domain zone for the www.zyxel.com.tw fully qualified domain
name. For example, whenever the device receives needs to resolve a zyxel.com.tw
domain name, it can send a query to the recorded name server IP address.
Leave this field blank if all domain zones are served by the specified DNS server(s).
Select the DNS Server(s) from ISP WAN 1 or DNS Server(s) from ISP WAN 2
radio button if your ISP dynamically assigns DNS server information. The fields
below display the (read-only) DNS server IP address(es) that the ISP assigns. N/A
displays for any DNS server IP address fields for which the ISP does not assign an
IP address. N/A displays for all of the DNS server IP address fields if the device has
a fixed WAN IP address.
Select Public DNS Server if you have the IP address of a DNS server. The IP
address must be public or a private address on your local LAN. Enter the DNS
server's IP address in the field to the right.
Public DNS Server entries with the IP address set to 0.0.0.0 are not allowed.
Select Private DNS Server if the DNS server has a private IP address and is located
behind a VPN peer. Enter the DNS server's IP address in the field to the right.
With a private DNS server, you must also configure the first DNS server entry in the
DNS LAN screen to use DNS Relay.
You must also configure a VPN rule since the device uses a VPN tunnel when it
relays DNS queries to the private DNS server. The rule must include the LAN IP
address of the device as a local IP address and the IP address of the DNS server as
a remote IP address.
Private DNS Server entries with the IP address set to 0.0.0.0 are not allowed.
Vantage CNM User's Guide

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vantage cnm

Table of Contents