Anti-Spam Lists Edit Screen - ZyXEL Communications Centralized Network Management Vantage CNM User Manual

Chapter 6 Device Security Settings
Table 57 Device Operation > Device Configuration > Security > Anti-Spam > Lists
LABEL
Content
Modify
Delete
Insert
Blacklist
Use Blacklist
#
Active
Type
Content
Modify
Delete
Insert
Apply
Reset

6.6.1 Anti-Spam Lists Edit Screen

To open this screen, click Insert or Edit in the Device Operation > Device Configuration >
Security > Anti-Spam > Lists screen.
Use this screen to configure an anti-spam whitelist entry to identify legitimate e-mail or a
blacklist entry to identify spam e-mail. You can create entries based on the sender's IP address
or e-mail address. You can also create entries that check for particular MIME headers, MIME
header values or specific subject text.
148
DESCRIPTION
This field displays the source IP address, source e-mail address, MIME header
or subject content for which the entry checks.
Click the Edit icon to change the entry. Click the Remove icon to delete the
entry. Click the Move icon to change the entry's position in the list.
Select the radio button next to an entry, and click Delete to remove the entry.
Type the index number where you want to put an entry. For example, if you type
6, your new entry becomes number 6 and the previous entry 6 (if there is one)
becomes entry 7.
Click Insert to display the screen where you edit an entry.
Select this check box to have the device treat e-mail that matches a blacklist
entry as spam.
This field shows the index number of the entry.
This field shows whether or not an entry is turned on.
This field displays whether the entry is based on the e-mail's source IP address,
source e-mail address, an MIME header or the e-mail's subject.
This field displays the source IP address, source e-mail address, MIME header
or subject content for which the entry checks.
Click the Edit icon to change the entry. Click the Remove icon to delete the
entry. Click the Move icon to change the entry's position in the list.
Select the radio button next to an entry, and click Delete to remove the entry.
Type the index number where you want to put an entry. For example, if you type
6, your new entry becomes number 6 and the previous entry 6 (if there is one)
becomes entry 7.
Click Insert to display the screen where you edit an entry.
Click Apply to save your changes back to the device.
Click Reset to begin configuring this screen afresh.
Vantage CNM User's Guide