Wan Backup (Prestige) - ZyXEL Communications Centralized Network Management Vantage CNM User Manual

Chapter 5 Device Network Settings
Table 27 Device Operation > Device Configuration > Network > WAN > Setup (Prestige)
LABEL
Max Idle Timeout
(Appears when you use
PPPoA and PPPoE
encapsulation)
Zero Configuration
Subnet Mask (Appears
when you use ENET
ENCAP encapsulation)
ENET ENCAP Gateway
(Appears when you use
ENET ENCAP
encapsulation)
Apply
Reset

5.3.7 WAN Backup (Prestige)

To change your device's WAN backup settings, click WAN > Backup. The screen appears as
shown.
94
DESCRIPTION
Specify an idle time-out in the Max Idle Timeout field when you select
Connect on Demand. The default setting is 0, which means the Internet
session will not timeout.
Select this if you want the device to automatically try to configure the
Internet connection. See the device's User's Guide for more information.
Enter the subnet mask provided by your ISP.
Enter the IP address of the gateway provided by your ISP.
Click Apply to save the changes.
Click Reset to begin configuring this screen afresh.
Vantage CNM User's Guide