Sony UP-D70A Series Operating Instructions Manual page 26

Adjusting the Gray Balance (Continued)
26
Operation
7
Display the pattern No. selected in step 2 or step 4 by pressing the ı or ∫
button.
Example: When you decided that the printout of the No.18 gray pattern was the
best.
GRA Y AD J US T
N o . = 1 8
8
To exit from the gray balance adjustment menu, press the MENU button again.
The printer returns to standby status.
RE ADY
A 4 QT Y
The gray balance has been adjusted.
After finishing the gray balance adjustment, make a printout of the gray balance
adjustment patterns. If the gray balance of the printout of No.0 gray pattern is the
best, the gray balance has been corrected to the gray balance selected in step 7.
Notes
• The next printout is printed with the newly set values. You cannot adjust the
color during printing.
• If you do not press any button for approximately 15 seconds after pressing the
MENU button , the printer is automatically reset to standby status.
1