Sony UP-D70A Series Operating Instructions Manual page 15

2
Remove the ink ribbon cassette by pressing the EJECT button.
The ink ribbon cassette pops out.
Note
Never put your hand into the ink ribbon compartment. The thermal head
becomes very hot. You may burn yourself if you touch it.
3
Detach the used ink ribbon from the ink ribbon holder.
1 Remove the spool with the
ink ribbon, while pressing in
the arrow direction.
4
Load the ink ribbon to ink ribbon holder.
1 Load the spool holding the ink ribbon into the right-hand
Ink ribbon holder
(supplied)
5
Remove any slack from the ink ribbon.
If the ribbon is left slack, it may be crumpled and damaged when inserted.
"Start" position marker
2 Remove the other spool.
part of the holder, while pressing in the arrow direction.
2 Fit the other spool into the left-
hand part of the holder.
Wind the spool until the "Start" position
marker faces upward.
Bar code
(Continued)
15
Operation