Sony UP-D70A Series Operating Instructions Manual page 24

Adjusting the Printouts (Contineud)
24
Operation
Adjustment items
Color RED
GREEN
BLUE
Tone DARK
LIGHT
Sharpness SHARPNESS
Half tone GAMMA
Lamination types LAMINATON
a) When you press ∫
Example: To set the level of DARK to 12
Press the ∫ button Twelfth.
DARK :
_ _ _ _ _ _ _ _ _ _ _ _ _
4
To exit from the printout adjust menu, press the MENU button again.
The printer returns to standby status.
RE ADY
A 4 QT Y
Notes
• You can also adjust the printout picture quality from the application software.
The most recently set values are effective until changed.
• The next printout is printed with the newly set values. You cannot adjust the
color during printing.
• If you do not press any button for approximately 15 seconds after pressing the
MENU button , the printer is automatically reset to standby status.
Adjustment content
Red becomes stronger.
Green becomes stronger.
Blue becomes stronger.
Dark tone becomes stronger.
Light tone becomes stronger.
The outlines become sharper.
Half tone colors become stronger.
OFF No lamination
Glossy Glossy surface
Nonglare surface
Nonglare
Texture Silk pattern surface
Foggy pattern surface
Matte
1 2
Level value changes.
Moves to the level-12 position.
1
a)
a)
a)
a)
a)
a)