Reverse Door Swing - GE Monogram Installation Instructions Manual

Reverse Tools Required:
• 1/4" and 5/16" wrench
Door
• Flat putty knife
Swing • Phillips screwdriver
Important:
Disconnect power to the ice machine.
• Remove the handle screws and lift off
• Remove the hinge pin from the top hinge.
• Lift the door off of the bottom hinge. Place
Reverse the door endcaps:
• Remove the screws and endcaps from the
• Place the top endcap onto the bottom of the
• Place the bottom endcap onto the top of the
• Set the door aside.
Reverse the hinges:
• Using a flat putty knife, remove the screw
• Remove the two screws holding top hinge.
• Turn the hinge upside down, with the hinge
• Remove the bottom hinge. Turn the hinge
• Push screw hole plug buttons (supplied)
• Remove the top hinge pin.
• Place plastic hinge sleeve on the bottom
• Place plastic hinge sleeve in the top hinge
• Reinstall handle with original screws.
To reverse the door catch:
• Remove the plastic screws from
• Remove the metal screws from
• Install the plastic screw into
8
handle. (On black and white models only.)
the hinge pin back into the top hinge.
door, top and bottom.
opposite side of the door with the long flat
side facing the door front.
opposite side of the door, with the long flat
side facing the door front.
hole plugs opposite of the door hinges, top
and bottom. Set aside.
pin pointing up. Reinstall the hinge on the
opposite side at the bottom of the door.
upside down and install on the opposite side
at the top.
into the original screw holes.
hinge and position the door onto the pin.
hole on the door. Align the door on the
bottom hinge and replace top hinge pin.
the opposite side of the door.
the magnetic door catch and
reinstall on the opposite side
of the door.
place on the opposite side of
the door.
Installation
Parts Supplied:
4 plug buttons
4 Hinge Screws (on some models)
Hinge Sleeve/
Door Stop
Plugs
Reverse
Door Catch
Position
Automatic Icemaker
Parts Identification: (For Reference Only)
Hinge Pin
5/16" Hex Head
Hinge Screw
Top Hinge
Hinge Pin
Hex Head Hinge Screw
Bottom Hinge
Hex Head
Hinge Screw
Hinge Sleeve/
Door Stop
Hinge
Hinge Pin
Top Hinge
Bottom Hinge
Handle Screw
Endcap Screw
Hinge
Plugs