Connect The Drain; Connect Water Supply - GE Monogram Installation Instructions Manual

Automatic icemaker
Hide thumbs Also See for Monogram:
Table of Contents

Advertisement

This ice machine is equipped with a gravity
Connect
drain to prevent water from flowing back into
the Drain
the ice machine storage bin and potentially
flowing onto the floor. A floor drain is
acceptable. The ideal installation has a
standpipe with a 2" to 1-1/2" PVC drain
reducer installed directly below the outlet of
the drain tube:
– 7-1/2" to centerline of the opening.
– Approximately 3-1/2" high.
– 22" from the front, or 22-3/4" when
installing a 3/4" door panel.
• Drain lines must be at least 5/8" inside
diameter.
Note: A drain pump is necessary when a floor drain is not
available. Order ZPK1 Drain Pump Kit or contact your local
plumber for a recommended pump available in your area.
TEST DRAIN HOSE ALIGNMENT: Before sliding the ice
machine into the cabinet opening check to be sure the bottom of
the drain tube is below the rear cover. To test, place a pan below
the drain hose. Pour a gallon of water into the ice bin and check to
be sure that water does not wet the rear cover.
• The water line should be flushed to clear
Connect
any foreign material before connecting to
Water
the icemaker.
Supply
• Connect the waterline to the water supply
tube outside of the rear access cover.
• Use a standard plumbing female connector
or union for 1/4" copper tubing that can be
purchased locally.
(Supplied)
• Make sure there are no sharp bends or kinks
which could restrict water flow.
• Slide the ice machine into its permanent
location.
• To prevent rattling, be sure the copper
tubing does not touch the side wall or other
parts inside the cabinet.
• Open the shut-off valve. Check for leaks.
Tighten any connections (including connec-
tions at the valve) if necessary.
Coupling
(Not Supplied)
Nut
Ferrule
(Not Supplied)
Line to
Icemaker
Installation
Locate Standpipe in exact
Center of The Cutout
Nut
(Supplied)
Water Pan
Drain
Water Valve
5-11/16"
Automatic Icemaker
Drain Hose
1"
3-1/2"
22"
22-3/4" With 3/4"
Custom Panel
3-1/2"
High
7-1/2"
15"
7-5/16"
12-1/4"
4-5/8"
Water
Supply
Line
7

Advertisement

Table of Contents
loading

This manual is also suitable for:

Zdi15Zdis15Monogram zdi15Monogram zdis15

Table of Contents