Printing Cpu Link Parameters (For S10V Controllers Only); Figure 4-28 [Pcs Edition] Window - Hitachi LQE550 User Manual

4.8.7 Printing CPU link parameters (for S10V controllers only)

Function: Prints the displayed CPU link parameters on a specified printer. (This feature is
supported only by Ver-Rev 01-02 or later of the S10V CPU link system.)
Operation: The procedure used is described below.
① Establish a connection with the programmable controller (see "(1) Procedure for setting and
editing parameters in online mode" in Subsection 4.6.3) if the CPU link system is running in
online mode. If it is running in offline mode, select the desired parameter file (see "(2)
Procedure for setting and editing parameters in offline mode" in Subsection 4.6.3).
② Click the Print button in the [PCs edition] window as shown below.

Figure 4-28 [PCs edition] Window

4-27
4 OPERATION
Click this button.