3 MOUNTING AND WIRING
CAUTION
Observe the installation procedure stated in the manual.
If the module is improperly installed, it may drop, become defective, or
malfunction.
Do not allow wire cuttings or other foreign matter to enter the module.
The entry of foreign matter in the module may result in a fire or cause the
module to become defective or malfunction.
Static electricity may damage the module. Before starting the work,
discharge all electrostatic charge from your body.
Properly tighten the screws. If they are inadequately tightened, malfunction,
smoke emission, or combustion may occur.
Do not disassemble or modify the module. Failure to observe this precaution
may result in a fire or cause the module to become defective or malfunction.
3-4