Figure 4-12 Clicking The [Offline] Radio Button - Hitachi LQE550 User Manual

4 OPERATION
⑤ Click the
values to the programmable controller. When the write operation is completed, the
[[S10V] CPU LINK SYSTEM] window will become active again. In this case, click
the Close
If you do not want to write them to the above-mentioned destination, just click the
Cancel
The procedure for setting and editing parameters in online mode is now complete.
(2) Procedure for setting and editing parameters in offline mode
① Display the [[S10V] CPU LINK SYSTEM] window on-screen by starting the S10V CPU
link system and click the [Offline] radio button in the window. The
Change connection
shown below.
Write button in the window if you want to write the specified parameter
button.
button instead.
button will then change into the

Figure 4-12 Clicking the [Offline] Radio Button

Edition file select
4-12
button, as
Click "Offline" radio button.
Button name is changed.