4.6.2 Setting up from the CPU link system
① The CPU link system, when started, opens the [CPU LINK SYSTEM] window. Do not
click the
Transfer system program
module is contained in the module itself.
Do not transfer the system program. If the system program is transferred, the
built-in program in the CPU link module may get out of control, causing invalid
data to be transmitted or CPU internal memory to be altered. If the system
program is transferred by mistake, reset the CPU module for recovery.
② Click the
PCs edition
Area that is set up for the
module used as main link
Area that is set up for the
module used as sublink
Figure 4-4 [CPU LINK SYSTEM] Window
button to see the [PCs edition] window open:
Figure 4-5 [PCs edition] Window (Initial State)
button. The system program used to run the CPU link
NOTICE
4-7
4 OPERATION