Setting Module Information; Setting Up From The S10Tools System And Ladder Diagram System (S10Mini Only); Figure 4-2 [Change Capacity] Window (Initial State) - Hitachi LQE550 User Manual

4.6 Setting Module Information

4.6.1 Setting up from the S10Tools system and ladder diagram system (S10mini only)

① Start the ladder diagram system
If the S10Tools system is used, start the ladder diagram system included with the S10Tools
system. If the ladder system diagram is used, simply start it.
② Choose [Utility] on the toolbar, then [PCs edition] and [Change capacity ...] to see the
[Change capacity] window open:
Area that is set up for the
module used as a main link
Area that is set up for the
module used as a sublink

Figure 4-2 [Change capacity] window (Initial State)

4-5
4 OPERATION