Mount Base; Mounting The Module; Figure 3-1 Mounting The Option Module; Table 3-1 Mount Bases Applicable To The Cpu Link Module - Hitachi LQE550 User Manual

3 MOUNTING AND WIRING

3.1 Mount Base

This module can be mounted in the mount bases shown in Table 3-1.

Table 3-1 Mount Bases Applicable to the CPU Link Module

Series
2-slot mount base
S10mini 4-slot mount base
8-slot mount base
4-slot mount base
S10V
8-slot mount base

3.2 Mounting the Module

Mount the option module in option slots (slot number 0 through 7) on the mount base as shown
below:
S10mini Series
Mount the option module in option slots that is located to the immediate right of
the CPU module. Be sure that no I/O module is mounted between this option
module and CPU module. Also, ensure that there is no unoccupied slot
between option modules.
This module (LQE550) can be mounted together with the LQE050 CPU link
module, which is specially designed for use with the S10mini.
S10V Series
There are no specific rules about the mounting position or unoccupied slots.
The LQE050 CPU link module cannot be used as it is specially designed for
use with the S10mini.
Name Model
HSC-1020
HSC-1040
HSC-1080
HSC-1540
HSC-1580
Mount base
Power supply CPU or LPU module
module

Figure 3-1 Mounting the Option Module

Power supply + CPU + 2 slots (option, for I/O)
Power supply + CPU + 4 slots (option, for I/O)
Power supply + CPU + 8 slots (option, for I/O)
Power supply + LPU + 4 slots (option, for I/O)
Power supply + LPU + 8 slots (option, for I/O)
NOTICE
Option slots
1 2 3 4 5 6
0 7
Option module
3-2
Specifications