Indicators Message; Table 10. Indicators Message - BOXLIGHT CP-635i User Manual

T T R R O O U U B B L L
T T R R O O U U B B L L

Indicators Message

The POWER indicator, LAMP indicator, and TEMP indicator are lit and blank as follows. Take the
appropriate measures.

Table 10. Indicators Message

POWER LAMP
indicator indicator
Lights
Turns off Turns off
orange
Blinks
Turns off Turns off
green
Lights
Turns off Turns off
green
Blinks
Turns off Turns off
orange
Blinks red -
Blinks Lights
/Lights red red
Blinks Blinks
/Lights red red
Blinks
Turns off
/Lights red
Blinks
Turns off Lights red
/Lights red
Lights Blinks
green red
NOTE When the internal temperature becomes excessive power is switched OFF automatically
for safety reasons, and the indicator is extinguished. Set the power switch to [O] and wait for 20
minutes until the equipment has cooled sufficiently.
E E S S H H O O O O
E E S S H H O O O O
TEMP
indicator
The Standby mode has been set.
Warming up. Please wait.
ON. Normal operation possible.
Cooling. Please wait.
Cooling. Please wait.
- The error is found. Take the appropriate measures when the
POWER indicator ceases blinking
Lamp is not lit.
The interior of the equipment may be too hot. Switch power OFF,
wait 20 minutes until the equipment cools, and check whether the
Turns off
ventilation openings are blocked, whether the air filter is dirty, or
whether the ambient temperature exceeds 35 °C. And switch
power ON again. Replace the lamp if the same problem occurs.
Lamp or lamp cover is not found, or hasn't been fitted in correctly.
Switch power OFF, and wait for 45 minutes until the equipment
Turns off
cools. Check fitting of the lamp and lamp cover, and switch power
ON again. Contact BOXLIGHT if the same problem occurs again.
The cooling fan is not operating.
Blinks
Switch power OFF, and wait for 20 minutes until the equipment
red cools. Check for foreign matters in the fan, and switch power ON
again. Contact BOXLIGHT if the same problem occurs again.
The interior of the equipment is too hot.
Switch power OFF, and wait for 20 minutes until the equipment
cools. Check whether the ventilation openings are blocked,
whether the air filter is dirty, or whether the ambient temperature
exceeds 35 °C. Then switch power ON again. Contact BOXLIGHT
if the same problem occurs again.
The interior of the equipment is too cool.
Blinks
Check whether the ambient temperature is below 0°C. Contact
red BOXLIGHT if the same problem occurs when the ambient
temperature is 0~35°C.
T T I I N N G G ( ( c c
T T I I N N G G ( ( c c
Contents
o o n n t t i i n n u u e e
o o n n t t i i n n u u e e
ENGLISH-21 ENGLISH-21
d d ) )
d d ) )