Table of Contents Table of Contents Computer Input Input Source Selection To the Owner Computer System Selection Computer Adjustment (Auto) Computer Adjustment (Manual) Safety Instructions Image Level Selection Image Level Adjustment Installing the Projector in Proper Position Screen Size Adjustment Air Circulation Moving the Projector Video Input...
“Troubleshooting” section at the end of result in a fire hazard. this booklet. If the problem still persists, contact BOXLIGHT. – Provide appropriate space on the top, sides and rear of the projector cabinet for allowing air circulation and cooling the projector.
Safety Instructions All the safety and operating instructions should be read before This projector should be operated only from the type of power the product is operated. source indicated on the marking label. If you are not sure of the type of power supplied, consult your authorized dealer or Read all of the instructions given here and retain them for later local power company.
G Do not transport the projector by using a courier or transport service in an unsuitable transport case. This may cause damage to the projector. To transport the projector through a courier or transport service, consult your Boxlight dealer for best way.
Do not make any changes or modifications to the equipment unless otherwise specified in the instructions. If such changes or modifications should be made, you could be required to stop operation of the equipment. Model Number : BOXLIGHT CP-320tA Trade Name : Boxlight...
Compliance Connecting the AC Power Cord This projector uses nominal input voltages of 100-120 V or 200-240 V AC. This projector automatically selects the correct input voltage. It is designed to work with single-phase power systems having a grounded neutral conductor. To reduce risk of electrical shock, do not plug into any other type of power system.
Features and Design This Multimedia Projector is designed with the most advanced technology for portability, durability, and ease of use. This projector utilizes built-in multimedia features, a palette of 16.77 million colors, and matrix liquid crystal display (LCD) technology. Compact Design User’s Logo This projector is extremely compact in size and weight.
Part Names and Functions Front Power Cord Connector Infrared Remote Receiver Zoom Lever Focus Ring Projection Lens Lens Cover (See page 54 for attaching.) Air Intake Vent w e r t Back Exhaust Vent CAUTION Hot air is exhausted from the exhaust vent.
Part Names and Functions Terminal AUDIO IN COMPUTER IN 1 VIDEO (MONO) DVI - I S-VIDEO SERVICE PORT COMPUTER / COMPONENT RESET AUDIO IN AUDIO OUT COMPUTER IN 2 / COMPONENT IN / MONITOR OUT (VARIABLE) Do not press this button. This button is used for optional accessories.
Part Names and Functions This projector has control buttons and indicators on its top. ON - OFF POWER INPUT WARNING KEYSTONE LAMP REPLACE SELECT MENU KEYSTONE button WARNING indicator Corrects keystone distortion. (p20, 38) Lights red when the projector detects abnormal condition. This also flashes red when the internal temperature of the projector exceeds the operating range.
Part Names and Functions L-CLICK button Acts as left click for wireless mouse operation. (p14) Remote Control SIGNAL EMISSION indicator This indicator lights red while the laser beam is being emitted from the laser light window or a signal is being sent from the remote control to the projector. AUTO PC button Operates the Auto PC adjustment function.
Part Names and Functions Laser Pointer Function This remote control emits a laser beam as Laser pointer function from the laser light window. When the LASER button is pressed, laser light goes on. When the LASER button is being pressed for more than 1 minute or the LASER button is released, light goes off.
Part Names and Functions Remote Control Code This projector has eight different remote control codes (Code 1-Code 8); the factory-set, initial code (Code 1) and the other seven codes (Code 2 to Code 8). This switching function prevents remote control interference when operating several projectors or video equipment at the same time.
Part Names and Functions Remote Control Operating Range Point the remote control toward the projector (Infrared Remote Receiver) whenever pressing any button. Maximum operating range for the remote control is about 16.4’ (5m) and 60° in front of the projector. 16.4’...
Installation Positioning the Projector This projector is designed to project on a flat projection surface and can be focused from 3.3’(1.0m) - 25.3’(7.7m). Refer to the figure and the table below for the screen size and the distance between the projector and the screen. A : B = 9 : 1 25.3' (7.7m) (Inch Diagonal)
Installation Connecting to a Computer Cables used for connection (✽ = These accessories are not supplied with this projector.) • VGA Cable (HDB 15 pin) ✽ • USB Cable • DVI-VGA Cable (HDB 15 pin) ✽ • MAC Adapter (When connecting to Macintosh computer) •...
Installation Connecting to Video Equipment Cables used for connection ✽ = These accessories are not supplied with this projector.) • Video Cable (RCA x 1) ✽ • Scart-VGA Cable ✽ • S-VIDEO Cable ✽ • Component-VGA Cable ✽ • Audio Cables (Mini Plug (stereo) x 2 or RCA x 2) ✽ Video Source (example) Component video output equipment.
Basic Operation Turning On the Projector Complete peripheral connections (with a computer, VCR, etc.) before turning on the projector. Connect the projector's AC power cord into an AC outlet. The POWER indicator flashes red in a moment and turns on red. Press the POWER ON-OFF button on the top control or on the remote control.
Basic Operation Zoom Adjustment Move the Zoom Lever to zoom in and out. Zoom Lever Focus Adjustment Rotate the Focus Ring to adjust the projected picture focus. Focus Ring Keystone Adjustment If a projected picture has keystone distortion, correct the image with KEYSTONE adjustment. Press the KEYSTONE button on the remote control or select Keystone in the Setting Menu (p38).
Basic Operation No Show Function Press the NO SHOW button on the remote control to black out the image. To restore to normal, press the NO SHOW button again or press any other button. When a projected image is captured and set as “User”...
Basic Operation On-Screen Menu You can control and adjust this projector through the On-Screen Remote Control Menu. Refer to the following pages to operate each adjustment POINT button on the On-Screen Menu. Press the MENU button to display the On-Screen Menu (Menu bar).
Basic Operation Menu Bar For computer source Guide Window PC System Menu Image Select Menu Screen Menu Setting Menu Shows the selected Used to select Used to select an Used to adjust size Used to change Menu of the On- computer system.
Computer Input Input Source Selection INPUT button Direct Operation Computer 1 Choose either Computer 1 or Computer 2 by pressing the INPUT button on the top control or press the COMPUTER button on the ✽ Computer 2 remote control. Before using these buttons, correct input source should be selected through menu operation as described below.
Computer Input Computer System Selection This projector can detect most of the current computer systems with the Multi-scan system and the Auto PC adjustment function provided in the projector. When selecting computer input, the projector automatically displays the most proper image for the input signal.
Computer Input Computer Adjustment (Auto) Auto PC Adjustment function is provided to automatically adjust Fine sync, Total dots, Horizontal, and Vertical to conform to your computer. Auto PC Adjustment function can be operated as follows. Press the MENU button and the On-Screen Menu will appear. PC Adjust Menu Press the Point Left/Right button to move the red frame pointer to the PC Adjust Menu icon.
Computer Input Computer Adjustment (Manual) Some computers employ special signal formats which may not be tuned by Multi-scan system of this projector. This projector has Manual PC Adjustment to enable you to precisely adjust several parameters to match those signal formats. The projector has 5 independent memory areas to memorize those parameters manually adjusted.
Page 28
Computer Input Display area Select the resolution at the Display area dialog box. Press the SELECT button at the Display area icon and the Display area H Display area dialog appears. Adjusts the horizontal area displayed by this projector. Press the Point Left/Right button to decrease/increase value and then press the Display area SELECT button.
Computer Input Image Level Selection Direct Operation IMAGE button Select an image level among Standard, Real, Image 1, Image 2, Image Standard 3, and Image 4 by pressing the IMAGE button on the remote control. Real Standard Normal picture level preset on this projector. Image 1 Real Image 2...
Computer Input Image Level Adjustment Press the MENU button and the On-Screen Menu will appear. Image Adjust Menu Press the Point Left/Right button to move the red frame pointer to the Image Adjust Menu icon. Press the Point Down button to move the red frame pointer to Image Adjust Menu icon the item that you want to adjust, and then press the SELECT button.
Computer Input Screen Size Adjustment This projector has a picture screen resize function, which enables you to display the desirable image size. Press the MENU button and the On-Screen Menu will appear. Screen Menu Press the Point Left/Right button to move the red frame pointer to the Screen Menu icon.
Video Input Input Source Selection (Video, S-Video) Direct Operation Choose Video by pressing the INPUT button on the top control or the INPUT button VIDEO button on the remote control. Before using these buttons, correct input source should be selected Video through menu operation as described below.
Video Input Input Source Selection (Component, RGB Scart 21-Pin) Direct Operation Choose Computer 2 by pressing the INPUT button on the top control INPUT button or press the COMPUTER button on the remote control. Before using these buttons, correct input source should be selected Computer 1 through menu operation as described below.
Video Input Video System Selection Press the MENU button and the On-Screen Menu will appear. Press the Point Left/Right button to move the red frame pointer to the AV System Menu icon. Press the Point Down button to move the red arrow pointer to the system that you want to select and then press the SELECT button.
Video Input Image Level Selection Direct Operation Select an image level among Standard, Cinema, Image 1, Image 2, IMAGE button Image 3, and Image 4 by pressing the IMAGE button on the remote Standard control. Cinema Standard Normal picture level preset on this projector. Image 1 Cinema Picture level adjusted for the picture with fine tone.
Video Input Image Level Adjustment Press the MENU button and the On-Screen Menu will appear. Image Adjust Menu Press the Point Left/Right button to move the red frame pointer to the Image Adjust Menu icon. Press the Point Down button to move the red frame pointer to Image Adjust Menu icon the item that you want to adjust and then press the SELECT button.
Video Input Reset Resets all adjustment to their previous figure. Store To store the adjustment data, move the red frame pointer to the Store Image Level Menu icon and press the SELECT button. The Image Level Menu will Move the red frame pointer appear.
Setting Setting Press the MENU button and the On-Screen Menu will appear. Setting Menu (Language) Press the Point Left/Right button to move the red frame pointer to the Setting Menu icon. Press the Point Down button to move the red frame pointer to Set the red frame Setting Menu icon the item that you want to set and then press the SELECT...
Page 39
Setting Ceiling Ceiling When this function is “On,” the picture is top/bottom and left/right reversed. This function is used to project the image from a ceiling mounting the projector. Rear When this function is “On,” the picture is left/right reversed. This Rear function is used to project the image to a rear projection screen.
Page 40
Setting Pointer Lamp mode This function allows you to change brightness of the screen. ···· normal brightness ···· the controlled brightness according with input signal ···· lowers brightness and reduces the lamp power consumption. Select Spotlight or Pointer with the Point Pointer Up/Down button and press the SELECT...
In this case, disconnect the AC power cord and reconnect it, and WARNING then turn the projector on once again for check. If the projector is still turned off and the WARNING indicator lights red, disconnect the AC power cord and call Boxlight at 1-800-762-5757 or 360-779-7901 for LAMP REPLACE WARNING service.
When using under dusty or smoky conditions, dust may accumulate on a lens, LCD panels, or optical elements inside the projector. This condition may degrade the quality of a projected image. When the above symptoms are noticed, contact Boxlight at 1-800-762-5757 or 360-779-7901 for proper cleaning. Cleaning the Projection Lens Follow these steps to clean the projection lens.
See “Lamp Replace Counter” on the next page . ORDER REPLACEMENT LAMP Replacement Lamp can be ordered through Boxlight at 1-800-762-5757 or 360-779-7901. When ordering a Projection Lamp, give the following information to the dealer. Model No. of your projector BOXLIGHT CP-320tA Replacement Lamp Type No.
Maintenance and Cleaning Lamp Replace Counter Be sure to reset the lamp replace counter after the lamp is replaced. When the lamp replace counter is reset, the LAMP REPLACE indicator stops lighting. Turn the projector on, press the MENU button and the On- Screen Menu will appear.
Appendix Troubleshooting Before calling your dealer or service center for assistance, check the items below once again. – Make sure you have properly connected the projector to peripheral equipment as described in "Connecting to a Computer" and “Connecting to Video Equipment” on page17 and 18. –...
Page 46
High voltages are used to operate this projector. Do not attempt to open the cabinet. If the problem still persists after following all operating instructions, contact Boxlight for assistance at 1-800-762-5757 or 360-779-7901. Give the model number and explain about the problem. We will advise you how to obtain service.
Appendix Indicators and Projector Condition Check the indicators for projector condition. Indicators Projector Condition LAMP WARNING POWER REPLACE red/green yellow The projector is OFF. (The AC power cord is unplugged.) The projector is preparing for stand-by or the projection lamp is being ✽...
Appendix Menu Tree Computer Input / Video Input Go to System Input Computer 1 RGB( Analog ) RGB( PC Digital ) RGB( AV HDCP ) Computer 2 Go to System Component Go to System RGB( Scart ) Go to System Video Auto Go to System...
Page 49
Appendix Video Input Setting System Sound Auto Volume 0 - 63 Mute On / Off 1080i 1035i Quit 720p Setting Language English 575p German 480p French 575i Italian 480i Spanish System Auto Portuguese Dutch SECAM Swedish NTSC Russian NTSC 4.43 Chinese PAL-M Korean...
Appendix Compatible Computer Specifications Basically this projector can accept the signal from all computers with the V, H-Frequency below mentioned and less than 140 MHz of Dot Clock. H-Freq. V-Freq. H-Freq. V-Freq. ON-SCREEN ON-SCREEN RESOLUTION RESOLUTION (kHz) (Hz) (kHz) (Hz) DISPLAY DISPLAY 86.96...
Appendix Technical Specifications Projector Type Multi-media Projector Dimensions 11.73" x 2.8" x 8.58" (298mm x 71mm x 218mm) (not including raised portions) (W x H x D) Net Weight 6.2 lbs (2.8 kg) LCD Panel System 0.8" TFT Active Matrix type, 3 panels Panel Resolution 1,024 x 768 dots Number of Pixels...
Appendix SERVICE PORT CONNECTOR Terminal : Mini DIN 8-PIN Pin Configuration PS/2 Serial ----- R X D ----- ----- 8 7 6 DATA ----- ----- ----- RTS / CTS ----- ----- T X D ----- ----- ----- USB CONNECTOR (Series B) Pin Configuration - Data + Data...
Appendix Attaching the Lens Cover When moving this projector or when it is not used for an extended Lens Cover period, replace the lens cover. Secure the string for the lens cover through a hole of the lens cover. String for the lens Turn the projector upside down and secure the string for cover lens cover to a hole on the bottom of the projector with a...
Page 56
Said warranty shall continue for a period of two (2) years from the date of such purchase. BOXLIGHT does not warrant that the Product will meet the specific requirements of the first person or entity that purchases the Product for personal or business use. Lamp is warrantied for 120 days. Accessories are warrantied for 1 year from date of purchase.
Need help?
Do you have a question about the CP-320tA and is the answer not in the manual?
Questions and answers