Philips 5000 Series User Manual page 32

Problem
I do not see water
vapor coming out
of the appliance. Is
it working?
The appliance
produces a strange
smell.
The appliance is
extra loud.
The appliance still
indicates that I
need to replace a
filter, but I already
did.
30 EN
Possible solution
When mist is very fine, it is invisible. The appliance has a
NanoCloud humidification technology, which produces healthy
humid air from the outlet area without formation of water mist.
Therefore, you cannot see the mist.
The first few times you use the appliance, it may produce
a plastic smell. This is normal. However, if the appliance
produces a burnt smell, contact your Philips dealer or an
authorized Philips service centre. The filter may produce smell
after being used for a while because of the absorption of
indoor air. Remove the filter and place it where it has direct
sunlight and ventilation for several hours. Re-install and try
using it again. If the odor remains, please replace the filter.
• You have not removed all packaging material of the filters.
Make sure that you have removed all packaging material.
• Change the fan speed to lower fan speed level.
Perhaps you did not touch and hold the reset button
correctly. Plug in the appliance, touch
appliance, and touch and hold the reset button
3 seconds.
to switch on the
for