What To Do If Your Appliance Does Not Work - Moulinex ULTRABLEND BOOST 1300 W Manual

WHAT TO DO IF YOUR APPLIANCE DOES NOT WORK ?

Problems
Appliance does not
work
The appliance stopped
while in use
Excessive vibrations
Leak or overflow from
the lid
Leak from the bottom
of the blender jug
Causes
The plug is not connected.
The blender jug is not posi-
tioned correctly on the motor
unit or the jug and lid are
correctly in place and are not
locked onto the motor unit.
Appliance, keypad or pro-
gram not responding
In case of overheating
Overflowing
Overload or overheating
The product is not placed on
a flat surface.
Volume of ingredients is too
high.
Volume of ingredients is too
high.
The lid is not correctly posi-
tioned.
Deterioration of the water-
tightness of the appliance.
62
Solutions
Connect the appliance to a
socket with the same voltage
as indicated on the rating
plate of the appliance.
Check that the blender jug
and the lid are positioned
properly on the motor unit as
explained in the instructions.
Unplug the appliance, wait
for 1 minute and plug in
again.
Switch the appliance off using
the start/stop button, unplug
and leave it to cool down for
approx.15-20 minutes.
Reduce the quantity of the
ingredients processed.
Switch the appliance off using
the start/stop button, unplug
and leave it to cool down for
approx.15-20 minutes.
Reconnect the appliance to
the power supply and resume
blending.
Place the appliance on a flat
surface.
Reduce the quantity of ingre-
dients processed.
Reduce the quantity of ingre-
dients processed.
Place the lid correctly on the
blender jug.
Caution : the blades are not
removable.
Contact the consumer ser-
vice, see contact information
in the warranty leaflet.