Moulinex ULTRABLEND BOOST 1300 W Manual page 61

Manual functions:
The manual functions can be used in
addition to program mode.
Clean : allows to clean your
•
appliance with 150 ml water
and 1 drop washing up liquid.
Allows to clean your appliance with
soapy water. Press Clean button. The
duration is 30 seconds.
The longest working time can not
be more than 3 minutes.
Blend : allows to freely control
•
the way you want to blend.
Press the blend button, the
screen indicates « P » corresponding to
the pulse function but you can choose
the blending speed from 1 to 9 by
pressing the setting +/- buttons (L). « H »
is the maximum speed. Then press start/
stop button. You can set up the working
time by pressing the setting +/- button
(L) between 5 seconds and 3 minutes.
The remaining time appears on the
screen. Wait for the blender to stop
automatically. The appliance beeps 3
times.
Heat : allows to freely control
•
the way you want to heat.
Press the heat button, the
screen indicates « 75 » but you can
choose the heating temperature from
40° up to 100° by pressing the setting
+/- buttons (L). You can set up the
working time by pressing the setting +/-
buttons (L) between 5 minutes and 90
minutes. Press start/stop button. The
remaining time appears on the screen.
Wait for the
automatically. The appliance beeps 3
times at the end of the program. You
can also stop the heating during the
cycle by pressing the start/stop
button or the cancel button.
PLASTIC TRITAN JAR FOR
COLD PREPARATION
• Add the ingredients into the jug
without exceeding the maximum level
heating to stop
indicated:
- 1750 ml max for cold jar
Automatic functions
How to use :
• Lock the lid on the jug and place
the lid cap in position on the lid. The
appliance only starts up once the jug
and lid are correctly in place.
• When you plug in the appliance and
switch it on, it will make a beep, and the
screen will light up.
• The appliance will be in standby mode.
At this stage, you can select a program
by pressing the corresponding button.
The button light flashes and the recipe
time information will be displayed.
-Before each auto program, you can use
vacuum function by pressing 'vacuum
button', duration: 1min10s
- When you use the vacuum function,
ensure the lid cap is screwed on tight.
• Press the start/stop button and the
appliance will start. At the end of the
recipe, the blender stops automatically.
The appliance beeps 3 times.
-If using the blender function, once the
program is complete, press the middle
of the lid cap to open the lid.
• You can also stop the blending during
the cycle:
-press the «Start/stop» button to pause
the program (up to 5 minutes, after
which the unit returns to the home
screen)
-press the «cancel» button to stop the
program and return to the home screen
• You can use the pusher to help the
recipes (when no vacuum function)
-Don't use this jar for hot preparation.
-Don't immerse the lid in water
To add ingredients while blending for
cold preparation only, remove the
lid cap (A) from the lid (B) and add the
ingredients through the feeder hole.
Beware of the risk of spatter.
CAUTION : Do not remove the lid cap
(A) from the lid during vacuum
59
EN