Ip Addresses And Subnet Masks; Downloading A Program Into Logo! 8 - Siemens LOGO! 8 Manual

3 Installation and Commissioning
3.3.5

IP addresses and subnet masks

Table 3-2
No.
1. Master LOGO!
2. Slave LOGO!
3. LOGO! TDE
4. Network card or USB Ethernet Adapter for
network connection to PC
Note The respective setup guidelines for LOGO! must generally be followed.
In this application example, all LOGO! signals are designed for 24V technology.
CAUTION
If a combination of 230V and 24V is required, a 230V basic device must be used.
Between a 230V basic device and a 24V expansion module, an analog module
for potential separation must be used.
3.4

Downloading a program into LOGO! 8

Together with this application example a completed LOGO! program for LOGO! 8
is offered for download. The table below contains a description on how to load the
completed LOGO! program into LOGO! 8. Start LOGO! Soft Comfort V8 and make
the following settings:
Table 3-3
No. Action/response
Navigate to "File > Open" and select the
1.
downloaded LOGO! program
"64143308_LOGO_Set9_
Master_Slave_CODE_v21.lnp".
The "Network view" with the master and
2.
slave LOGO! opens.
3. Double-click on the program title to open the
diagram.
Frei verwendbar House Control with Master-Slave - LOGO! Set 9
Entry ID: 64143308, V2.2,
Device
09/2018
IP address
192.168.1.10 255.255.255.0
192.168.1.11 255.255.255.0
192.168.1.14 255.255.255.0
192.168.1.12 255.255.255.0
LOGO! Soft Comfort V8
Subnet mask
21