User Defined Webserver (Logo! V8.2) - Siemens LOGO! 8 Manual

3 Installation and Commissioning
No. Action/response
Click "Apply" and then click
7.
"Yes" when the message
appears, in order to set the
LOGO! back to RUN. Click
"OK" to close the window.
8. The settings for web server
access are now complete.
Call up the web server by
entering the IP address of
the master LOGO! in your
internet browser (tablet,
smartphone or PC).
Note The web server can be called with the following devices and browsers:
3.6

User defined Webserver (LOGO! V8.2)

Since version 8.2, LOGO! 8 offers a user-defined web server.
The web project is created with the LOGO! web editor (LWE) and loaded onto a
Micro-SD card.
You will find instructions for project planning the LWE in the form of a video
Note
under the following link:
- https://support.industry.siemens.com/cs/ww/en/view/109757017
The LOGO! web editor is available for download at the following link:
- https://w3.siemens.com/mcms/programmable-logic-controller/en/logic-module-logo/logo-
software/Pages/Default.aspx#LOGO__20Web_20Editor
Frei verwendbar House Control with Master-Slave - LOGO! Set 9
Entry ID: 64143308, V2.2,
•
PCs with all compatible web browsers
•
All smartphones (optimized resolution)
All compatible web browsers
•
Tablet PCs (optimized resolution)
All compatible web browsers
09/2018
LOGO! Soft Comfort V8
25