Advertisement
Attaching a Fiber Optic Cord
1.
Attach the fiber optic port to the end of the converter to
cover the slave window.
2.
Attach a compatible fiber optic cord to the fiber optic port.
3.
Attach the other end of the fiber optic cord to your
housing.
Maintenance and Storage
Post-Dive
1.
Rinse the strobe with converter attached thoroughly in
fresh water after each use.
2.
Dry the strobe and converter with a clean, lint-free cloth.
Travel and Storage
1.
Remove the converter from the strobe.
2.
Wipe off the threads of the strobe bulkhead and the
converter retaining ring using a clean, lint-free cloth.
3.
Lightly lubricate the o-ring and the threads of the strobe
bulkhead and converter retaining ring.
4.
Attach the connector protector to the converter plug end.
Limited Warranty
This Ikelite product is warranted against any manufacturing
defects for a period of one (1) year from the original date
of purchase. To obtain warranty service, the product must
be returned to Ikelite postage paid. Ikelite will, at its sole
discretion, repair or replace such products, and will return
to customer postage paid. All other claims of any nature are
not covered. Except as mentioned above, no other warranty
expressed or implied applies to this Ikelite product.
Contact Us
Ikelite Underwater Systems
50 W 33rd St
Indianapolis, IN 46208 USA
(317) 923-4523
ikelite@ikelite.com
Advertisement
