Bartscher 130.110 Manual page 23

Whip use
- Insert the whip utensil in the motor unit and tighten the utensil lock
nut.
- Connect the motor unit to the power plug.
- For mod. MX40, turn the speed adjustment knob to a number
between 1 and 10.
- For model FX40, turn the speed adjustment knob to:
- Firmly hold the mixer lock nut with one hand and the motor unit
handle with the other.
- Insert the mixer in the container with the product to be processed.
- Press the on button being careful not to near hands or any other
part of the body to the area where the whips are located.
- Rotate the speed adjustment knob to select the best rotation speed
for the process.
- When finished, release the on button to stop the utensil and remove
the whip utensil from the container.
DANGER – WARNING: Never near upper limbs or other parts of the body to the
area where the mixer utensil is located when inserted in the motor unit. Only clean
Recommendations for use
Use the mixer utensil in containers, making sure to rest the
protective blade hood on the bottom so that processing product
never exceeds the maximum level notch on the utensil (2/3 of the
accessory).
Use the whip tool in containers, making sure never to rest the two
whips on the bottom and so that the gear box is always out of the
processing product.
INFORMATION: Be very careful never to submerge the whip utensil gear box in
processing product to avoid damaging the gear unit inside.
utensils removed from the motor unit.
12
USE AND CLEANING
INFORMATION
MX40
3
FX40