Table of Contents
Advertisement
TZM883V
5.0 LOCAL CONTROL
Local control permits video switching and setting of the configuration
parameters for matrix functioning.
The double function buttons (TAKE, FUNCT, CANC and CHANGE) are used
in the matrix configuration phase.
The status of the matrix is shown on the display, indicating the video sources
switched on the destinations, whose number is screen-printed directly on the
front panel. For output 8, preview active information is also displayed.
Normal display is as follows:
Indicates that output 6 is not
connected to any input
ELPRO Video Labs s.r.l.
8
St.da della Pronda, 45/B 10142 Torino ITALY
Tel.+39 0117701583 – Fax +39 011703751
1 2 3 4 5 • 7 8
8x8 GRAPHIC MATRIX
P
Indicates that output 8
is used as preview
output
Inputs connected
to the VIDEO
outputs
8
Advertisement
Table of Contents
