Table of Contents
Advertisement
TZM883V
6.0 CONFIGURATION
Certain TZM883V functioning parameters can be configured via the keypad
and with the aid of the LCD display. To activate the configuration phase,
press the buttons indicated in the screen-printing with MENU at the same
time, i.e. buttons INPUT 8 + OUTPUT 1.
Possible options are shown on the display and the second function of the
keys is activated:
TAKE
Confirms the value set and moves to the next
FUNCT
Moves to the next item
CANC
Abort, or if pressed for 2 seconds terminates the configuration
phase without making any modification
CHANGE Modifies the value of the item selected
Options of the main menu:
• Setup, enters functioning parameter configuration.
• Default config., activates the default configuration with the current
status of the connections. The next time the matrix is switched on, the
currently set connections are applied.
• Exit, exits from this menu.
Move from one item to the next using the FUNCT key, confirming with the
TAKE key. Pressing of the CANC key in this phase causes exit from the
menu.
The Setup men comprises the following options:
Default configur.:
IR receiver:
Out preview:
ELPRO Video Labs s.r.l.
10
St.da della Pronda, 45/B 10142 Torino ITALY
Tel.+39 0117701583 – Fax +39 011703751
Activates or de-activates the default configuration.
Select ENABLED or DISABLED with the CHANGE key and confirm with
the TAKE key.
(default value = DISABLED)
Enables or disables the IR receiver for the remote control.
Select ENABLED or DISABLED with the CHANGE key and confirm with
the TAKE key.
(default value = ENABLED)
Enables or disables output 8 as preview output.
Select ENABLED or DISABLED with the CHANGE key and confirm with
the TAKE key.
8x8 GRAPHIC MATRIX
10
Advertisement
Table of Contents
