Set Seamless Times Command - ELPRO TZM883V Installation And Use Manual

TZM883V
The matrix replies with:
<ACK> if the command has been performed successfully
<NAK> if transmission errors or invalid control parameters have been
detected
Example: To program the last output as preview output, the following hexadecimal
characters must be sent on line:
70 31 0D
The matrix replies:
ACK (Hex 06)
NACK (Hex 15) if transmission errors have been detected

9.8 Set Seamless Times command

The seamless switching times can be set for each single output or for all the
outputs.
The host must send the following sequence:
W 1 control character(Hex 57)
uu 2 characters that indicate the number of the output for which to
set the time (from "01" to "08")
If uu = "00" the time is set for all the outputs.
t 1 character that indicates the wait time:
<CR> 1 end of string character(Hex 0D)
The matrix replies with:
<ACK> if the command has been performed successfully
<NAK> if transmission errors or invalid control parameters have been
detected
Example: To set a seamless time of 1 second for output 4, the following hexadecimal
characters must be sent on line:
ELPRO Video Labs s.r.l.
20 St.da della Pronda, 45/B 10142 Torino ITALY
Tel.+39 0117701583 – Fax +39 011703751
if the command has been performed successfully
"0" : 300 msec.
"1" : 500 msec.
"2" : 1 second
"3" : 2 seconds
8x8 GRAPHIC MATRIX
20
2