Table of Contents
Advertisement
TZM883V
Seamless time: Out n
Backlight:
TAKE=save
CANC=abort
TAKE=exit
FUNC=view ethernet
NOTE:
The network parameters displayed below are only some (the main) parameters set using
DST software, necessary to configure the network interface installed on the matrix. For a
more detailed description and for use of this program, refer to the document "LAN202 –
User Manual ".
The software and related documentation can be downloaded from the Elpro site
http://www.elprovideolabs.com/
IP address:
xxx.xxx.xxx.xxx
IP port:
xxxxx
Subnet mask:
xxx.xxx.xxx.xxx
Gateway:
xxx.xxx.xxx.xxx
ELPRO Video Labs s.r.l.
St.da della Pronda, 45/B 10142 Torino ITALY
Tel.+39 0117701583 – Fax +39 011703751
(default value = DISABLED, i.e. output 8 as normal output)
Sets the "through blank" switching time for each single output. The
CHANGE key modifies the value for the output indicated, 300 msec,
500 msec, 1 sec, 2 sec.
Move to setting of the time for the next output with the FUNCT. key
The values set are confirmed with the TAKE key.
(default value = 300 msec. for all the outputs)
Sets the value for backlighting of the display.
Select a value between 1 (minimum) and 5 (maximum) with the INPUT1
... INPUT5 keys.
Confirm with the TAKE key.
(default value = 4)
Requests confirmation of the settings made. If confirmed with the
TAKE key, the parameters are saved in the non-volatile memory. The
CANC key cancels the settings made and restores the previous
settings.
In any case, moves to the next selection which makes it possible to
display (but NOT to modify) the parameters relating to Ethernet
communication
With the TAKE key, exits from setup and returns to normal functioning
mode of the matrix, while with the FUNC key, the main network
parameters set are displayed.
Network IP address.
FUNC key to display the next parameter.
Number of the port used.
FUNC key to display the next parameter.
Subnetwork address mask.
FUNC key to display the next parameter.
Address for communications outside the local network
FUNC key to display the next parameter.
8x8 GRAPHIC MATRIX
11
11
Advertisement
Table of Contents
