Electronic Equipment; Serial Port - EdilKamin FANTASY Installation, Use And Maintenance Manual

ELECTRONIC EQUIPMENT

LE R ® is a combustion safety and control system which allows optimal performance in all
conditions than s to two sensors measuring the pressure level in the combustion chamber and smo e
temperature.
he detection of and subsequent optimisation of these two parameters is continuous in order to correct
operation anomalies in real time.
he LE R system offers constant combustion, automatically regulating the draft based on the
®
characteristics of the chimney ue (bends, length, shape, diameter, etc..) and environmental conditions
(wind, humidity, atmospheric pressure, installations at high altitude, etc.).
he standards for installation must be respected.
LE R system is also able to recognise the type of pellets and automatically djust the ow mo-
®
ment by moment to ensure the required level of combustion.
ELECTRONIC CIRCUIT BOAR

SERIAL PORT

he ealer can install an optional on the
switching on and off (e.g. telephone remote, local thermostat), located at the rear oh the
stove. an be connected via special optional trestle (code
BAC UP BATTERY
bac up battery is found on the control board ( - olt R
function is indicated with the following messages (not considered a defect but due to
normal wear-and-tear): " attery chec .
For more detailed information, please contact the E LER who has performed the rst
st ignition.
CHARACTERISTICS
anel control
bac up battery
Lithium
+
lithium R
CR2032
Smo e e pulsion motor S RE
ventilation
outlet for controlling the process of
ow
sensor
optional
smo e rpm
vac power
supply
z - %
R
FUSE *
two fuses are inserted in the soc et with
switch, located on the bac of the stove,
one of which operational * and the other
is held in reserve **.
).
battery). ts mal-
- 28
-
sensor air
ambient
acuum gauge
Reading
points
S E
* **