Opengear OM2200 Series User Manual page 89

1. Navigate to CONFIGURE > USER MANAGEMENT > Remote Authentication.
2. Ensure the required protocol mode is selected (TACACS+, RADIUS, LDAP).
3. Select the authentication policy you require (DownLocal or Local).
4. Click Apply. The policy change is confirmed by a green confirmation banner.
Authentication Scenarios
The following example shows RADIUS protocol mode, but the behavior is the same
for other protocols such as TACACS+ or LDAP.
User does not exist:
l
When using RemoteLocal authentication for all types of remote servers, if
l
remote authentication fails because the user does not exist on the remote
AAA server, the OM device will attempt to authenticate the user using a
local account as per a regular local log in.
CONFIGURE MENU 89