Opengear OM2200 Series User Manual page 108

1. In the Configure > Services > Syslog tab click on the IP address of the target server.
The Edit Syslog Server tab is opened for editing.
2. You can delete a server by clicking the Delete button at the top right of the Edit tab
page.
Syslog Terminology
Syslog logging terminology used in setting Facility and Severity of the Syslog.
Create Syslog Server Tab - Field Definitions
Page location: Configure > Services > Syslog > Create Syslog Server
Field
Description
Server Address
Protocol
Port
Minimum Log Sever-
ity Level
Send Serial Port
Logs
Create Button
CONFIGURE MENU
Definition
Unique, familiar text description or name given to this sys-
log server that users will recognize.
The IP address of the remote syslog server you are using
for logging.
Click to select the required protocol for data transmission
to the syslog server.
The Remote Syslog Server IP address.
Log entries with a value equal or greater than the level spe-
cified are sent to the remote server.
Click to enable serial port logging.
Click to initiate the remote syslog, wait for confirmation ban-
ner.
108