Dual Sim - Opengear OM2200 Series User Manual

Dual SIM

CONFIGURE > NETWORK CONNECTIONS> Network Interfaces > Cellular Inter-
face (LTE)
Devices that carry two SIM cards can have both SIMs configured so that you can
manually activate either SIM card slot.
Display SIM Status and Signal Strength
Note: For information about configuring the Signal Strength Thresholds see:
"SNMP Alerts" on page 49
1. Navigate to Configure > Network Connections > Network Interfaces.
2. Click on the Cellular Interface (LTE) row.
3.
The information bar expands, and the page shows the current status of the active and
inactive SIM cards.
Note: If the unit does not have a cell modem (-L) then the cellular inter-
face will not be visible.
4. The active SIM indicates the color of the signal strength based upon the selected
thresholds in Configure → SNMP Alerts under the Networking Signal Strength
Alert.
CONFIGURE MENU
.
53