Multiple Snmp Alert Managers - Opengear OM2200 Series User Manual

Multiple SNMP Alert Managers

CONFIGURE > SNMP > SNMP Alert Managers > Add New SNMP Alert Manager
The Multiple SNMP Alert Managers feature provides the option to configure more
than one SNMP manager. Multiple SNMP Alert Managers can receive trap and
inform events that can be used to trigger remedial action; events can be sent to mul-
tiple SNMP Alert Managers. The AR functionality sends traps to all configured
SNMP Alert Managers for a reaction of type SNMP. Whether you input an IPv6
address or a domain name, the correct protocol needs to be selected.
Create or Delete a New SNMP Manager
To create a new SNMP manager:
1. Navigate to Configure > SNMP > SNMP Alert Managers.
2. Click the Add New SNMP Manager button (a plus character in the top-right of the win-
dow)
3. Complete the new SNMP Alert Manager Form as per the Definitions table below.
4. Click the Submit button. A banner appears confirming that the new SNMP Manager
has been successfully created.
5. The new manager appears in the list of SNMP Alert Managers.
6. To delete an SNMP manager, click on the IP address of the item to open the Edit
SNMP Manager page for that SNMP Manager.
7. Click on the Delete SNMP Manager widget in the top-right of the page.
Note: If you would like to use an IPv6 Address, then you need to select either
UDP6 or TCP6 from the list of protocols. Whether you input an IPv6 address or
a domain name, the correct protocol needs to be selected.
CONFIGURE MENU 139