Disable A Root User - Opengear OM2200 Series User Manual

Disable a Root User

CONFIGURE > User management > Local Users
To disable a root user:
Note: Before proceeding, make sure that another user exists that has the
Administrator role or is in a group with the Administrator role. For information
on creating, editing, and deleting users, see
1. Navigate to CONFIGURE > User management > Local Users
2. Click the Disable User button in the Actions section next to the root user.
3. Click Yes in the Confirmation dialog.
To enable root user, log in with another user that has the Administrator role and
click the Enable User button in the Actions section next to the root user.
.
Change Network Settings
CONFIGURE > Network Connections > Network Interfaces
The interface supports both IPv4 and IPv6 networks. The IP address of the unit can
be setup for Static or DHCP. The following settings can be configured for network
ports:
IPv4, IPv6
l
Static and/or DHCP
l
Enabling or disabling network interfaces
l
Ethernet Media types
l
To add a new connection:
INITIAL SYSTEM CONFIGURATION
"Local Users" on page 77
22