Advertisement
6
B. Initial camera setup
B1. APR and Bright Pixels
After switching the camera on you may see a message
saying "Please Execute APR". This is not an error or
malfunction. The APR (Automatic Pixel Restoration)
function minimizes the appearance of bright or dark
sensor pixels and minimizes sensor noise.
Cover/cap the lens so that all light is excluded and press
the Multi-function Dial, the handgrip thumbstick or the set
button to execute the APR function.
If you do not perform APR you will be reminded to
perform APR the next time the camera is turned on.
You should perform APR regularly to maintain the best
possible image quality or if you notice tiny bright dots
(bright pixels) within in the cameras output.
Contents
Section Index
Advertisement
