Advertisement
O. Using the Cine EI Mode (in detail)
MLUT's can only be enabled when the recording format
is set to 3840x2160 (UHD). They are enabled via (MENU:
Shooting – Monitor LUT Setting).
WARNING: Do not enable an MLUT for internal rec
unless you no longer wish to record S-Log3 and
instead wish to record the MLUT as a baked in look.
If you wish to use a different MLUT you can change the
MLUT by going to (MENU: Shooting – Monitor LUT).
If the camera is set to output 1920 x 1080 HD over SDI or
HDMI then the MLUT will be added to the output signal.
If the camera is set to output 3840 x 2160 UHD then
the MLUT will only be applied to the viewfinder and if
enabled the streaming output, HD Sub recording or Proxy
recording. It will not be applied to the output which will
remain as S-Log3.
Contents
Section Index
102
Advertisement
