Advertisement
149
U. Error messages and common problems
U6. Unable to change the SDI or HDMI output format
If Picture Cache is turned on you may not be able
to change the monitoring output format settings.
Temporarily turn off the picture cache function to change
the output settings.
U7. Can't access any network functions
Before you can use any of the camera's network
capabilities you must first set up a password. Until you set
up a password you will not be able to access any of the
other network functions.
U8. System Reset
If the camera is not performing as expected try a system
reset to restore the factory defaults (MENU: Maintainance
– All Reset).
Contents
Section Index
Advertisement
