Advertisement
F. ISO, Gain and Dual ISO
This gives you the flexibility to choose the most appropriate
base sensitivity for the scenes that you are shooting,
including using a mix of both Hi and Lo base within the
same project. Where you have good light levels you should
choose Lo Base as this has the very lowest noise levels and
where your light levels are lower you should choose Hi Base.
RECOMMENDATION: I suggest adding the Base ISO
Hi/Lo function to an assignable button so that you can
quickly switch between Hi and Lo Base as needed.
You should also note that if operating the camera in Custom
Mode with the camera set to ISO (rather than dB gain) it
can be a little confusing as to how much gain you may be
adding as it is possible to achieve the same ISO rating in
both Hi Base and Low Base.
Contents
Section Index
48
Advertisement
