Pepp Next Rain Cover; Cleaning And Maintenance - Nuna PEPP next Manual

Before attaching the KLIK plus infant carrier, recline the seat
back to position 1 by unzipping the outer zippers.
8
- To attach the infant carrier, place the infant carrier on
the infant car seat adaptors. A "click" sound means the
infant carrier is attached. (38)
9
- To remove the infant carrier, push the stroller release
buttons on the infant carrier (39)-1 and lift up (39)-2.
Remove the infant carrier before folding.
To remove the infant car seat adaptors, unlatch the infant
car seat adaptors from the seat frame. Then reattach the
fabric to the seat frame and secure the hook and loop.
PEPP next Stroller Rain Cover
To assemble the rain cover, place it over the stroller seat.
(40)
Always check ventilation, especially in hot weather
when the rain cover is on the product.
Always check that the rain cover has been cleaned and
dried before folding.
DO NOT fold the stroller after assembling the rain cover.
DO NOT place your child into the stroller assembled
with rain cover during hot weather.
17 PEPP next instructions

Cleaning and Maintenance

Clean the frame, plastic parts, and fabric with a damp
cloth, but do not use abrasives or bleach. Do not use silicon
lubricants as they will attract dirt and grime. Do not store
your stroller in a damp place.
Clean the stroller wheels regularly with water and remove
any dirt.
To ensure long-lasting use, wipe off this product with a soft,
absorbent cloth after using it in rainy weather.
Refer to the care label attached to the fabric for washing and
drying instructions.
It is normal for fabric to color from sunlight and to show
wear and tear after a long period of use, even when used
normally.
For reasons of safety, only use original Nuna parts.
Check regularly if everything functions properly. If any parts
are torn, broken, or missing, stop using this product.
NUNA International B.V. NUNA and all associated logos are trademarks.
PEPP next instructions 18