Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Nuna pipa urbn
Summary of Contents for Nuna pipa urbn
- Page 2 Thank you! You’ve just purchased a Nuna product, and you can be sure that your child is getting the best there is. Our products are expertly engineered for safety, with luxury fabrics and sophisticated style. Whatever made you fall in love with...
-
Page 3: Table Of Contents
™ REFERENCE: Product Overview READ CAREFULLY Product Use Installation Installation Using Rigid Lower Anchors Using Vehicle Lap/Shoulder Belt Installation in an Aircraft Installation on a Stroller Accessories Seat Pad Removal Cleaning and Maintenance PIPA urbn instructions PIPA urbn instructions... -
Page 4: Product Information
Nuna Baby Essentials Inc. In the USA: 70 Thousand Oaks Blvd. infousa@nunababy.com Morgantown, PA 19543 www.nunababy.com 1.855.NUNA.USA or call 1.855.NUNA.USA... -
Page 5: Child Usage Requirements
See page 11 to learn what is classified as a Store the instruction manual in the moderate to severe crash. pocket located within the seat pad. PIPA urbn instructions PIPA urbn instructions... - Page 6 1-855-NUNA-USA. The carrier NEVER modify any part of the can fall from a child restraint. shopping cart. DO NOT attempt to DO NOT use on use this carrier with a shopping cart. a base. PIPA urbn instructions PIPA urbn instructions...
-
Page 7: Car Seat Use After A Crash
Car Seat Use after DO NOT use any products or accessories with this child a Crash restraint unless they are approved by Nuna for use The National Highway Traffic with this child restraint. Doing Safety Administration (NHTSA) so may be unsafe and may recommends that car seats be void the warranty. -
Page 8: Vehicle Compatibility
Airbags inflate with great force and can cause severe injury to a child’s neck and spine. If your vehicle is equipped with PIPA urbn instructions PIPA urbn instructions... - Page 9 This belt cannot be used to install this child restraint. - Lap Belts forward of Seat Bight This belt (is forward of where the seat back and seat bottom meet) cannot be used to install this child restraint. PIPA urbn instructions PIPA urbn instructions...
-
Page 10: Pipa ™ Urbn Parts List
PIPA urbn Parts List ™ Make sure all parts are available before assembly. If any part is missing, please contact Nuna (see page 5 for information). No tools are required for assembly. Rigid Lower Anchor Guides Head Support Seat Pad... -
Page 11: Product Overview
- Pull the canopy drape out of the compartment and attach the canopy drape to the magnets on each corner at the front of the carrier. (continued on the next page) PIPA urbn instructions PIPA urbn instructions... - Page 12 - Undo the snaps on the seat soft goods near the handle. - Push the release button in the center of the canopy mounts and pull the canopy mounts out of the seat shell to remove. 20 PIPA urbn instructions PIPA urbn instructions...
- Page 13 - To remove the head support, unfasten the hook and loop ends behind the seat fabric. - Pull the head support straps through the harness slots. (continued on the next page) 22 PIPA urbn instructions PIPA urbn instructions...
- Page 14 (highlighted) can be used for even smaller babies, but it must be removed once the child reaches 11 lb. - To remove the low birth weight pillow, slide it out of the pocket on the body support. 24 PIPA urbn instructions PIPA urbn instructions...
- Page 15 - Then turn child restraint over and remove one harness loop from metal splitter plate. - Pull loose end of harness out through slots and place in correct slot. (continued on the next page) 26 PIPA urbn instructions PIPA urbn instructions...
- Page 16 Shoulder Belts (continued) - Re-attach harness loop to splitter plate. Do not allow harness to pass over bars. Repeat process for second shoulder harness strap. 28 PIPA urbn instructions PIPA urbn instructions...
- Page 17 Be sure handle is locked in the carry position before lifting child restraint by handle. An Position 1 unlocked handle could move unexpectedly, causing injury to child. Position 2 Position 3 30 PIPA urbn instructions PIPA urbn instructions...
-
Page 18: Product Use
The child should be seated against both the back and bottom of the seat with no gap behind the child. Do not allow child to slouch. (continued on the next page) 32 PIPA urbn instructions PIPA urbn instructions... - Page 19 If harness slots need to be moved, see Shoulder Belts section (p.26). Gently guide child’s arms through harness straps. If more harness length is needed, see page 26 for instructions. (continued on the next page) 34 PIPA urbn instructions PIPA urbn instructions...
- Page 20 Verify that the harness is snug around the child’s waist and shoulders. - Position the chest clip at child’s armpit level. (continued on the next page) click 36 PIPA urbn instructions PIPA urbn instructions...
- Page 21 It does not press on the child’s flesh or push the child’s body into an unnatural position. Harness is snug – A snug harness cannot be pinched horizontally, and should not allow any slack. 38 PIPA urbn instructions PIPA urbn instructions...
-
Page 22: Installation
This also lowers the recline bar, which helps position the child restraint at the correct angle for installation. - Position child restraint in a forward facing vehicle seat. (continued on the next page) 40 PIPA urbn instructions PIPA urbn instructions... - Page 23 A gap between the restraint and the vehicle seatback may be visible. It is acceptable to install with both rigid lower anchors and the vehicle belt. 42 PIPA urbn instructions PIPA urbn instructions...
- Page 24 - Rotate rigid lower anchor connectors up to storage position, and click them into place. Remove child restraint from the vehicle. click 44 PIPA urbn instructions PIPA urbn instructions...
-
Page 25: Using Vehicle Lap/Shoulder Belt
Refer to vehicle owner’s manual for instructions. If you cannot lock the vehicle belt, you must use a locking clip (p.52). See p. 50 for final belt install steps. 46 PIPA urbn instructions PIPA urbn instructions... - Page 26 LOCK the vehicle belt. Refer to vehicle owner’s manual for instructions. If you cannot lock the vehicle belt, you must use a locking clip (p.52). See p. 50 for final belt install steps. 48 PIPA urbn instructions PIPA urbn instructions...
- Page 27 Blue line must be level with ground. Vehicle belt must be buckled, tight and must stay locked. Child restraint should be stable and not move side to side more than 1 inch at belt path. 50 PIPA urbn instructions PIPA urbn instructions...
-
Page 28: Installation In An Aircraft
Locking Clip If you determine that you need to use a locking clip, please contact Nuna Customer Service. By phone: 1.855.NUNA.USA By email: infousa@nunababy.com Installation in an Aircraft Position child restraint so that child is facing the aircraft seat back. -
Page 29: Accessories
- Infant Car Seat Ring Adapter - Infant Car Seat Post Adapters Visit nunababy.com for more information. PIPA urbn Rain Cover - Place the rain cover over the child restraint. ALWAYS check ventilation when the rain cover is on the child restraint. -
Page 30: Seat Pad Removal
- Remove the harness from the splitter plate. - Pull the adjuster strap out through the bottom adjuster strap opening. Re-attach the seat pad following steps 1 through 3 in reverse. 56 PIPA urbn instructions PIPA urbn instructions... -
Page 31: Cleaning And Maintenance
Check regularly if everything functions properly. If any parts are torn, broken, or missing, stop using this product. Contact Nuna for replacement parts. Nuna Baby Essentials, Inc. Nuna and all associated logos are trademarks. 58 PIPA urbn instructions 58 PIPA urbn instructions...
Need help?
Do you have a question about the pipa urbn and is the answer not in the manual?
Questions and answers