Display Firewall Http Url-Filter Parameter - H3C SecPath Series Command Reference Manual

<Sysname> display firewall http url-filter host item ^webfilter$
The HTTP request packet including "^webfilter$" had been matched for 10 times.
# Display URL address filtering information about all filtering entries.
<Sysname> display firewall http url-filter host all
SN Match-Times
----------------------------------------------
1
Table 3 Output description
Field
SN
Match-Times
Keywords
# Display detailed information about URL address filtering.
<Sysname> display firewall http url-filter host verbose
URL-filter host is enabled.
Default method: permit.
The support for IP address: deny.
No ACL group has been configured.
URL-filter host has loaded file "cfa0:/urlfilter".
There are 10 packet(s) being filtered.
There are 0 packet(s) being passed.
Table 4 Output description
Field
Default method
The support for IP address

display firewall http url-filter parameter

Syntax
display firewall http url-filter parameter [ all | item keywords | verbose ]
View
Any view
Default level
1: Monitor level
Parameters
all: Specifies all filtering keywords.
item keywords: Specifies a filtering keyword. The keywords argument is a case-insensitive string of 1 to
80 characters. Valid characters include numerals, English letters, wildcards ('^', '$', '&' and '*'), and
other ASCII characters with values in the range 31 to 127.
verbose: Specifies detailed information.
Keywords
10 ^webfilter$
Description
Default URL address filtering action, which can be permit or deny.
Support for website IP addresses, permit or deny.
Description
Serial number
Number of times that the keyword has been matched
URL address filtering keyword
6