Sip Interface Capabilities - Cisco BroadSoft BroadWorks Spectralink 84 Series Configuration Manual

2.2.1

SIP Interface Capabilities

The Spectralink 84xx Series has completed interoperability testing with BroadWorks using
the BroadWorks SIP Phone Interoperability Test Plan [6]. The results are summarized in
the following table.
The BroadWorks test plan is composed of packages, each covering distinct
interoperability areas, such as "Basic" call scenarios and "Redundancy" scenarios. Each
package is composed of one or more test items, which in turn are composed of one or
more test cases. The test plan exercises the SIP interface between the device and
BroadWorks with the intent to ensure interoperability sufficient to support the BroadWorks
feature set.
NOTE: DUT in the following table refers to the Device Under Test, which in this case is the
Spectralink 84xx Series.
BroadWorks SIP Phone Interoperability Test Plan Support Table
Test Plan Package
Basic
BroadWorks
Services
BROADSOFT PARTNER CONFIGURATION GUIDE – SPECTRALINK 84XX SERIES
© 2018 BROADSOFT INC.
Test Plan Package Items
Call Origination
Call Termination
Session Audit
Session Timer
Ringback
Forked Dialog
181 Call Being Forwarded
Dial Plan
DTMF – Inband
DTMF – RFC 2833
DTMF – DTMF Relay
Codec Negotiation
Codec Renegotiation
Third-Party Call Control – Basic
Third-Party Call Control – Advanced
Voice Message Deposit/Retrieval
Message Waiting Indicator –
Unsolicited
Message Waiting Indicator –
Solicited
Message Waiting Indicator – Detail
Voice Portal Outcall
Advanced Alerting – Ringing
Advanced Alerting – Call Waiting
Supported Comments
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
Yes
Yes
Yes
Yes
NA
Yes Does not support Click to Dial.
Yes
Yes
Yes
Yes Does not support saved and
urgent information.
Yes
No
No
20-BD5605-00
PAGE 8 OF 34