Cisco BroadSoft BroadWorks Spectralink 84 Series Configuration Manual page 31

<!-- *
* -->
<!-- * This file contains the user-specific information for the user
of a * -->
<!-- * specific handset identified by its MAC address. In particular
it * -->
<!-- * contains the user name and extension for that user.
* -->
<!-- * -->
<!-- * -->
<!-- * -->
<!-- * This file MUST be named as <macaddress>-ext.cfg where
<macaddress> is the
<!-- * 12 digit MAC address of the handset without : separators. The
MAC * -->
<!-- * address is printed on the label in the battery well of each
handset.
<!-- * For example if the handset label reads MAC: 00:90:7A:0E:7F:E5,
this file* -->
<!-- * should be named 00907a0e7fe5-ext.cfg
* -->
<!--
**************************************************************************
* -->
<LineRegistration>
<!-- * -->
<!-- * -->
<!-- The information below is the user-specific information. The
global server settings are in -->
<!-- the SystemParameters->TelephonyParameters->SIPserver -->
<openSIPTelephony
reg.1.address="BWReg1address"
reg.1.auth.password="BWReg1Password"
reg.1.auth.userID="BWReg1UserID"
reg.1.label="BWReg1Label"
reg.1.displayName="BWReg1DisplayName"
tone.dtmf.chassis.masking="1"
tone.dtmf.viaRtp="0"
voIpProt.SIP.dtmfViaSignaling.rfc2976="0"
call.autoOffHook.1.enabled="1"
call.clickToDial.referBased.userConfirm="1"
BROADSOFT PARTNER CONFIGURATION GUIDE – SPECTRALINK 84XX SERIES
© 2018 BROADSOFT INC.
* -->
* -->
call.callsPerLineKey="24" >
<TelephonyLine1
20-BD5605-00
PAGE 31 OF 34